ADLINK IMB-S90 - Manual (Page 79)

IMB-S90 IPMI User’s Manual
79
Add IP rule
2. In the Add new rule for IP window, Enter the IP address or a range of IP
addresses in the IP/IP range field.
Note: IP Address will support IPv4 Address format only:
• IPv4 Address made of 4 numbers separated by dots as in xxx.xxx.xxx.xxx.
• Each number ranges from 0 to 255.
• First number must not be 0.
3. Enter the IP settings to be either Block or Allow. IP Settings are used to
determine the rule whether block or allow from the configured IP or IP Range.
4. Click Save to save the changes made else click Cancel to go back to the previous
screen.
5. To delete an IP address or a range of IP addresses, select the slot and click Delete.
3.7.21.1.3 To set system firewall for a range of Port addresses
Click the Port tab. A sample screenshot of Port tab is shown below.
System Firewall - Port
The fields of System Firewall - Port tab are explained below.
Port/Port Range: Lists all the configured Port Address or Range of Ports.