ADLINK IMB-S90 - Manual (Page 50)

IMB-S90 IPMI User’s Manual
50
The fields of Configuration – NTP are explained below.
Date: To specify the current date of the device
Time: To specify the current Time for the device.
Note: As Year 2038 Problem exists, Date and Time should be configured within the range.
TimeZone: Timezone list contains the UTC offset along with the locations and Manual
UTC offset for NTP server, which can be used to display the exact local time.
Primary NTP Server & Secondary NTP Server: NTP Server fields will support the
following:
• IP Address (Both IPv4 and IPv6 format).
• FQDN (Fully qualified domain name) format.
• FQDN Value ranges from 1 to 128 alpha-numeric characters.
Automatically synchronize Date & Time with NTP Server: To automatically synchronize
Date and Time with the NTP Server.
Refresh: To reload the current date and time settings.
Save: To save the settings.
Reset: To reset the modified changes.
3.7.12.1 Procedure
1. Enter the Date and Time in the given fields.
Note: These fields are enabled only when the option Automatically synchronizes
Date & Time with NTP Server is disabled.
2. Select the Timezone from the drop-down list.
3. In the Primary NTP Server / Secondary NTP Server field, specify the NTP server
for the device.
Note: Secondary NTP server is optional field.If the Primary NTP server is not
working fine, then the Secondary NTP Server will be tried.
4. To Automatically synchronize Date & Time with NTP Server, enable the option.
5. Click Refresh button to reload the date and time settings
6. Click Save button to save the entries.
7. Click Reset button to reset the entries.