ADLINK IMB-S90 - Manual (Page 127)

IMB-S90 IPMI User’s Manual
127
Eg9: ./Yafuflash –kcs public.pem –replace-publickey
Description: This command works with KCS medium which replaces the public key in
Existing Firmare.
Eg10: ./Yafuflash -kcs rom.ima -preserve-sel -preserve-ipmi
Description: This command works with KCS medium, which will ask for other
configurations which are already set to be preserved to preserve or not and after that it will
start to flash the new
rom.ima to the firmware with preserving SEL and IPMI as well as selected configurations.
Eg11: ./Yafuflash -kcs rom.ima -preserve-sel -ignore-existing-overrides
Description: This command works with KCS medium, which start to flash the new
rom.ima to the firmware with preserving FRU configurations only
Eg12: ./Yafuflash –kcs rom.ima -quite
Description: This command works with KCS medium, which start to flash the new rom.ima
with minimum progress details.
3.15.2 Installation in Linux
1. Open Terminal and go to YafuFlash/Linux path.
2. This contains Yafuflash tool.
3. Run ./Yafuflash in the terminal.
4. Format: ./Yafuflash [OPTIONS] [MEDIUM] [FW_IMAGE_FILE] where, Perform
BMC Flash Update
• -? Displays the utility usage
• -h Displays the utility usage
• -V Displays the version of the tool
• -e List outs a few examples of the tool
[OPTIONS]
- info Displays information about existing FW
and new FW
- force-boot Option to FORCE BootLoader upgrade
during full upgrade
- preserve-config Option Preserve configuration module
during full upgrade
-quite Use the option to show the minimum flash
progress details.