ADLINK IMB-S90 - Manual (Page 113)

IMB-S90 IPMI User’s Manual
113
3.11.1 Firmware Update
This wizard takes you through the process of firmware upgradation. A reset of the box will
automatically follow if the upgrade is completed or cancelled. An option to preserve
configuration will be presented. Enable it, if you wish to preserve configured settings
through the upgrade.
WARNING: Please note that after entering update mode widgets, other web pages and
services will not work. All open widgets will be closed automatically. If upgrade process is
cancelled in the middle of the wizard, the device will be reset.
Note:
The firmware upgrade process is a crucial operation. Make sure that the chances of a
power or connectivity loss are minimal when performing this operation.
Once you enter into Update Mode and choose to cancel the firmware flash operation, the
MegaRAC® card must be reset. This means that you must close the Internet browser and
log back onto the MegaRAC® card before you can perform any other types of operations.
To open Firmware Update page, click Firmware Update > Firmware Update from the
menu bar. A sample screenshot of Firmware Update Page is shown below.
Firmware Update Page
The various fields of Firmware Update are as follows.
Current Active Page: Displays the name of current active page.
Image to be uploaded: List of images to be uploaded. If required both the images can be
chosen.
Reboot the device after update: Option to reboot the machine after the update is done.