ADLINK IMB-S90 - Manual (Page 64)

IMB-S90 IPMI User’s Manual
64
Example: 2
testoperator Auth-Type := PAP,Cleartext-Password := “operator”
Auth-Type :=PAP, Vendor-Specific=”H=3”
If you change the Vendor-Specific value in server then you should change
the same values in this page.
3. Enter the port number in the Port field.
4. Enter the address of the server in the Server Address field.
5. Enter the authentication secret for RADIUS Server in the Secret field.
6. In the Extended Privileges, check the required options,
• KVM
• VMedia.
7. Click Save to save the entered details.
8. Click Reset to reset the entered details.
3.7.16 Remote Session
In MegaRAC SP, use this page to configure virtual media configuration settings for the
next redirection session. Encryption is disabled by default.
To open Remote Session page, click Configuration > Remote Session from the menu
bar. A sample screenshot of Remote Session Page is shown below.
Remote Session
The fields of Configure Remote Session Page are explained below.
. Encryption : Enable/Disable encryption on KVM data for the next redirection session.
Note: This option is disabled if Single Port is enabled.
Keyboard Languages: This option is used to select the keyboard supported languages.