ADLINK IMB-S90 - Manual (Page 76)

IMB-S90 IPMI User’s Manual
76
System and Audit Log Settings
The fields of System and Audit Log Settings Page are explained below.
System Log: This field is to enable or disable the system logs.
Log Type: Specifies the Log type for system logs, whether it should be preserved in a
local file or on a remote server.
Note: Local file resides at /var/log/
File Size: This field is to specify the size of the file in bytes if the selected log type is local.
Note: Size ranges from 3 to 65535.
Rotate Count: To back up the log information in back up files.
Note:
• Value ranges from 0 to 255.
• When log information exceeds the file size, the old log information is automatically
moved to back up files based on the rotate count value. If rotate count is zero, then
old log information gets cleared permanently.
Server Address: This field is to specify the remote server address to log the system
events.
Note: Server address will support the following:
• IPv4 address format.
• FQDN (Fully qualified domain name) format.
Audit Log: To enable or disable the audit log.
Save: To save the configured settings.
Reset: To reset the previously-saved values.