ADLINK IMB-S90 - Manual (Page 137)

IMB-S90 IPMI User’s Manual
137
Description: This command starts to flash the new rom.ima to the firmware with FORCE
BootLoader upgrade.
Eg4: Yafuflash -kcs –preserve-config rom.ima
Description: This command starts to flash the new rom.ima to the firmware with
preserving config params.
Eg5: Yafuflash -kcs –force-boot –preserve-config rom.ima
Description: This command starts to flash the new rom.ima to the firmware with FORCE
BootLoader upgrade and preserving config params.
Eg6: Yafuflash -kcs –i rom.ima
Description: This command starts to flash the new rom.ima using interactive upgrade
mode and user, will be prompt to select the number of modules and module names to
upgrade.
Eg7: Yafuflash -kcs –img-section-info
Description: Displays the details of Existing Firmware.
Eg8: Yafuflash -kcs –img-info
Description: Displays the details of Existing Firmware Version.
Eg9: Yafuflash -kcs public.pem –replace-publickey
Description: Replaces the public key in Existing Firmware.
Eg10: Yafuflash -kcs rom.ima -preserve-sdr
Description: This command will ask for other configurations which are already set to be
preserved to preserve or not and after that it will start to flash the new rom.ima to the
firmware with preserving SDR as well as selected configurations.
Eg11: Yafuflash -kcs rom.ima -preserve-snmp -preserve-ntp
Description: This command will ask for other configurations which are already set to be
preserved to preserve or not and after that it will start to flash the new rom.ima to the
firmware with preserving SNMP and NTP as well as selected configurations.
Eg12: Yafuflash -kcs rom.ima -preserve-fru -ignore-existing-overrides
Description: This command starts to flash the new rom.ima to the firmware with
preserving FRU configurations only.
Eg13: Yafuflash -kcs rom.ima -preserve-fru -preserve-snmp -ignore-existing-overrides
Description: This command starts to flash the new rom.ima to the firmware with
preserving FRU and SNMP configurations only.