ADLINK IMB-S90 - Manual (Page 80)

IMB-S90 IPMI User’s Manual
80
Protocol: Lists all the configured protocols of particular port or port ranges.
Port Settings: To indicate the corresponding Port or Range of Ports rules that Allow or
Block.
Advanced Settings: To configure the Advanced Firewall Settings Options are Block all
and Flush all.
Add: To add a new entry to the port entry.
Delete: To delete the selected slot.
3.7.21.1.4 Procedure
To block or allow the Port address
1. To add a new rage of Port address, click the Add button.
Add Port rule
2. In the Add new rule for Port window, enter the port address or a range of port
addresses in the Port/Port range field.
Note: Port value ranges from 1 to 65535.
3. Select the Protocol to be either TCP or UDP.
4. Select the Port Setting to be either Block or Allow. Port Settings are used to
determine the rule whether block or allow from the configured Port or Port Range.
3.7.21.2
User Management
In MegaRAC GUI, the User Management page allows you to view the current list of user
slots for the server. You can add a new user and modify or delete the existing users.
To open User Management page, click Configuration > Users from the menu bar. A
sample screenshot of User Management Page is shown below.