ADLINK IMB-S90 - Manual (Page 37)

IMB-S90 IPMI User’s Manual
37
Share Type: Share Type of the remote media server either NFS or Samba(CIFS).
Username, Password and Domain Name: If share Type is Samba(CIFS), then user
credentials to authenticate the server.
Save: To save the settings.
Cancel: To cancel the modifications and return to Image list.
3.7.4.2 Local Media
This tab displays the list of available images in the local media on BMC. You can replace
or add new images from here. To configure the image, you need to enable Local Media
support under Images Redirection -> Advanced Settings. Once you enable this option,
the user can add the images and the added images will be redirected to the host machine
Note:
To replace or add an image, you must have Administrator Privileges.
Only one image can be uploaded for each image type. If the existing image and uploading
image name is same, then a message is shown “Image already exists”.
In Local Media redirection, the maximum upload size is 8MB.
The fields of Local Media tab is as follows:
Add Image: To upload a new image to the device.
Replace Image: To replace the existing image.
Delete Image: To delete the desired image.
3.7.4.2.1 Procedure:
1. To add, remove or modify images, click Advanced Settings and make sure Local
Media Support option is enabled. If not, disable Remote Media Redirection and then
enable Local Media Redirection.
2. Click on the Local Media Tab.
3. To add an image, select a free slot and click Add Image to upload a new image to
the device. Alternatively, double click on a free slot to add an image. A sample
screenshot of Add Image screen is given below.
Add Image