ADLINK IMB-S90 - Manual (Page 49)

IMB-S90 IPMI User’s Manual
49
Link Speed: Link speed will list all the supported capabilities of the network interface. It
can be 10/100/1000 Mbps.
Duplex Mode: Duplex Mode could be either Half Duplex or Full Duplex.
Save: To save the settings.
Reset: To reset the modified changes
3.7.11 Procedure:
1. Select the LAN Interface from the drop down list.
2. Select either ON or OFF for Auto Negotiation.
Note: The Link Speed and Duplex Mode will be active only when Auto Negotiation
is OFF.
3. Select the Link Speed from the drop-down list.
4. Select the Duplex Mode from the drop-down list.
5. Click Save to save the configuration.
6. Click Reset to reset the configuration.
3.7.12 NTP Settings
The Network Time Protocol (NTP) is a protocol for synchronizing the clocks of computer
systems over packet-switched, variable-latency data networks. It is designed particularly to
resist the effects of variable latency by using a jitter buffer.
In MegaRAC GUI, this page displays the device current date and time settings. It can be
used to configure either Date & Time or NTP server settings for the device.
To open NTP Settings page, click Configuration > NTP from the menu bar. A sample
screenshot of NTP Settings Page is shown below.
NTP Settings page