ADLINK IMB-S90 - Manual (Page 68)

IMB-S90 IPMI User’s Manual
68
5. Choose any one of the available interfaces from the Interface drop-down list.
6. Enter the Nonsecure port number in the Nonsecure Port field.
7. Enter the Secure Port Number in the Secure Port field.
8. Enter the timeout value in the Timeout field.
Note: The values in the Maximum Sessions field cannot be modified.
9. Click Modify to save the entered changes and return to the Services Page.
10. Click Cancel to exit.
3.7.18 SMTP
Simple Mail Transfer Protocol (SMTP) is an Internet standard for electronic mail (e-mail)
transmission across Internet Protocol (IP) networks.
Using MegaRAC GUI, you can configure the SMTP settings of the device.
To open SMTP Settings page, click Configuration > SMTP from the menu bar. A sample
screenshot of SMTP Settings Page is shown below.
SMTP Settings Page
The fields of SMTP Settings Page are explained below.
LAN Channel Number: Displays the list of LAN channels available
Sender Address: A valid ‘Sender Address’ to indicate the BMC, whenever email is sent.
Machine Name: The ‘Machine Name’ of the BMC, from where the email is sent.