ADLINK IMB-S90 - Manual (Page 125)

IMB-S90 IPMI User’s Manual
125
Description: This command works with network medium using the ip 155.166.132.12,
which start to flash the new rom.ima with minimum progress details.
3.15.1.2 Examples for USB Medium:
Eg1: ./Yafuflash –cd rom.ima -info
Description: This command works with USB medium which displays the details of both
Existing Firmware and new firmware.
Eg2: ./Yafuflash –cd rom.ima
Description: This command works with USB medium which start to flash the new rom.ima
to the firmware.
Eg3: ./Yafuflash –cd rom.ima –force-boot
Description: This command works with USB medium which start to flash the new rom.ima
to the firmware with FORCE BootLoader Upgrade.
Eg4: ./Yafuflash –cd rom.ima –preserve-config
Description: This command works with USB medium which start to flash the new rom.ima
to the firmware with preserving config params.
Eg5: ./Yafuflash –cd rom.ima –force-boot –preserve-config
Description: This command works with USB medium which start to flash the new rom.ima
to the firmware with FORCE BootLoader Upgrade and preserving config params.
Eg6: ./Yafuflash –cd rom.ima -i
Description: This command works with USB medium, which start to flash the new
rom.ima using interactive upgrade mode and user, will be prompt to select the Number of
modules and module names to upgrade.
Eg7: ./Yafuflash –cd -img-section-info
Description: This command works with USB medium which displays the details of
Existing Firmware.
Eg8: ./Yafuflash –cd -img-info
Description: This command works with USB medium which displays the details of
Existing Firmware Version.
Eg9: ./Yafuflash –cd public.pem –replace-publickey
Description: This command works with USB medium which replaces the public key in
Existing Firmare.
Eg10: ./Yafuflash -cd rom.ima -preserve-sel -preserve-ipmi
Description: This command works with USB medium, which will ask for other
configurations which are already set to be preserved to preserve or not and after that it will