ADLINK IMB-S90 - Manual (Page 122)

IMB-S90 IPMI User’s Manual
122
- force-boot Option to FORCE BootLoader upgrade
during full upgrade
- preserve-config Option Preserve configuration module
during full upgrade
-quite Use the option to show the minimum flash
progress details.
- i Option to interactive upgrade (Upgrade
only required modules)**
- ignore-platform-check Option use to flash different image to
different platform.
-ignore-boot-version Option use to skip the user interaction if
the Boot loader version is different and –
force boot option is not given.
-ignore-non-preserve-config Option skips the restore to default factor
setting if the image shares the same
configuration area.
-img-section-info Displays information about current FW
Sections.
-img-info Displays information about current FW
Versions.
-replace-publickey Option to replace the Public Key in Existing
Firmware.
-preserve-XXX Option to preserve XXX configuration and
it will ask for other already preserved
configurations to be preserved or not,
where XXX falls in sdr, fru, sel, ipmi, auth,
net, ntp, snmp, ssh, kvm, auth.
-preserve-XXX -ignore-existing-overrides Option to preserve only XXX
configuration. -ignore-existing-overrides
must be used with at least one preserve-
XXX option.
[MEDIUM]
-cd Option to use USB Medium
-nw,-ip,-u,-p,-host Option to use Network Medium
‘-ip’ Option to enter IP, when using Network
Medium
‘-host’ Option to enter host name, When
using Network Medium