ADLINK IMB-S90 - Manual (Page 39)

IMB-S90 IPMI User’s Manual
39
Note: The Start Redirection button is active only for VMedia enabled users.
2. Select a configured slot and click Start Redirection to start the remote media
redirection. It is a toggle button, if the image is successfully redirected, then click
Stop Redirection to stop the remote media redirection.
3. To add an image, select a free slot and click Add Image to configure a new image
to the device. Alternatively, double click on a free slot to add an image.
4. To replace an image, select a configured slot and click Replace Image to replace
the existing image. Alternatively, double click on the configured slot.
5. To delete an image, select the desired image to be deleted and click Delete Image.
Note : Redirection needs to be stopped to replace or delete the image.
3.7.5 LDAP/E-Directory Settings
The Lightweight Directory Access Protocol (LDAP)/E-Directory Settings is an
application protocol for querying and modifying data of directory services implemented in
Internet Protocol (IP) networks.
In MegaRAC GUI, LDAP is an Internet protocol that MegaRAC
®
card can use to
authenticate users. If you have an LDAP server configured on your network, you can use it
as an easy way to add, manage and authenticate MegaRAC
®
card users. This is done by
passing login requests to your LDAP Server. This means that there is no need to define an
additional authentication mechanism, when using the MegaRAC card. Since your existing
LDAP Server keeps an authentication centralized, you will always know who is accessing
the network resources and can easily define the user or group-based policies to control
access.
To open LDAP/E-DIRECTORY Settings page, click Configuration > LDAP/E-Directory
from the menu bar. A sample screenshot of LDAP/E-Directory Settings page is shown
below.
LDAP/E-Directory Settings Page