ADLINK IMB-S90 - Manual (Page 115)

IMB-S90 IPMI User’s Manual
115
Upload Firmware
d. Verifying Firmware Image
In Section Based Firmware Update, you can configure the firmware image
for section based flashing. Check the required image and click Proceed. If
flasing is required for all the images, select the option Check this option to
do full firmware flash.
Note: Only selected sections of the firmware will be updated. Other sections are skipped.
Before starting flash operation, you are advised to verify the compatibility between image
sections.
Section Based Firmware Flashing
e. Flashing Firmware Image
f. Resetting Device
Note: You will not be able to perform any other tasks until firmware upgrade is complete
and the device is rebooted.
Note: You can now follow the instructions presented in the subsequent pages to
successfully update the card’s firmware. The device will reset if update is canceled. The
device will also reset upon successful completion of firmware update.