ADLINK IMB-S90 - Manual (Page 45)

IMB-S90 IPMI User’s Manual
45
Note: Recommended for SLES-11 OS Installation
2. Click Save button to save the changes made.
3. Click Reset to reset the modified changes.
3.7.8 NCSI
In MegaRAC GUI, this page is used to configure Network Controller Sideband Interface
(NCSI) configuration settings.
To open NCSI page, click Configuration > NCSI from the menu bar. A sample
screenshot of NCSI Page is shown below.
Configure NCSI
The following fields are displayed in this page
NCSI Interface: It lists the interface name in list box.
Channel Number: Lists the channel number of the selected interface.
Package ID: Lists the package id of the selected interface.
Save: To save the current changes.
Reset: To reset the modified changes.
3.7.8.1 Procedure
1. Choose the particular NCSI Interface to which you need to configure NCSI settings.
2. Choose the Channel Number to be configured for the selected Interface name.
3. Choose the Package ID to be configured for the selected Interface name.
4. Click Save to save the current changes.
5. Click Reset to reset the modified changes.