ADLINK IMB-S90 - Manual (Page 83)

IMB-S90 IPMI User’s Manual
83
8. Choose the SNMP Access level option for user from the SNMP Access drop-down
list. Either it can be Read Only or Read Write.
9. Choose the Authentication Protocol to use for SNMP settings from the drop down
list.
Note: Password field is mandatory, if Authentication protocol is changed.
10. Choose the Encryption algorithm to use for SNMP settings from the Privacy
protocol drop-down list.
11. In the Email ID field, enter the email ID of the user. If the user forgets the password,
the new password will be mailed to the configured email address.
Note: SMTP Server must be configured to send emails.
Email Format: Two types of formats are available:
AMI-Format: The subject of this mail format is ‘Alert from (your Host name)’. The
mail content shows sensor information, ex: Sensor type and Description.
Fixed-Subject Format: This format displays the message according to user’s
setting. You must set the subject and message for email alert.
12. In the New SSH Key field, click Browse and select the SSH key file.
Note: SSH key file should be of pub type.
13. Click Add to save the new user and return to the users list.
14. Click Cancel to cancel the modification and return to the users list.
3.7.21.2.1.2 Modify an existing User
15. Select an existing user from the list and click Modify User or alternatively double
click on the configured slot. This opens the Modify User screen as shown in the
screenshot below.