ADLINK IMB-S90 - Manual (Page 33)

IMB-S90 IPMI User’s Manual
33
New TSIG Private File: Browse and navigate to the TSIG private file.
Note: TSIG file should be of private type
3.7.2.4 Domain Name Configuration
• Domain Settings: It lists the option for domain interface as Manual, v4 or v6 for
multiLAN channels.
Note: If you choose DHCP, then select v4 or v6 for DHCP servers.
• Domain Name: It displays the domain name of the device. If the Domain setting is
chosen as Manual, then specify the domain name of the device. If you chose
Automatic, the Domain Name cannot be configured as it will be done automatically.
The field will be disabled.
3.7.2.5 Domain Name Server Configuration
•
DNS Server Settings: It lists the option for v4 DNS settings for the device, Manual
and available LAN interfaces.
•
IP Priority:
• If IP Priority is IPv4, it will have 2 IPv4 DNS servers and 1 IPv6 DNS server.
• If IP Priority is IPv6, it will have 2 IPv6 DNS servers and 1 IPv4 DNS server.
Note: This is not applicable for Manual configuration.
• DNS Server 1, 2 & 3
To specify the DNS (Domain Name System) server address to be configured for the
BMC.
Note:
• IPv4 Address made of 4 numbers separated by dots as in “xxx.xxx.xxx.xxx”.
• Each number ranges from 0 to 255.
• First number must not be 0.
DNS Server Address will support the following:
• IPv4 Address format.
• IPv6 Address format.
Save: To save the entered changes.
Reset: To reset the entered changes.