ADLINK IMB-S90 - Manual (Page 136)

IMB-S90 IPMI User’s Manual
136
-Ignore-module-location Option use to skip the user interaction if
the flashing image is Contains different
module locations.
-Ignore-boot-version Option use to skip the user interaction if
the Boot loader version is different and –
force boot option is not given.
-Ignore-non-preserve-config Option skips the restore to default factor
setting if the image shares the same
configuration area.
img-section-info Displays information about current FW
Sections.
-img-info Displays information about current FW
Versions.
-replace-publickey Option to replace the Public Key in Existing
Firmware.
-preserve-XXX Option to preserve XXX configuration and
it will ask for other already preserved
configurations to be preserved or not,
where XXX falls in sdr, fru, sel, ipmi, auth,
net, ntp, snmp, ssh, kvm, auth.
-preserve-XXX -ignore-existing-overrides Option to preserve only XXX
configuration. -ignore-existing-overrides
must be used with at least one preserve-
XXX option.
[MEDIUM]
-kcs Option to use KCS Medium
[FW_IMAGE_FILE] Firmware image file
name [rom.ima].
**Interactive upgrade is not a default option. This option can be enabled in YafuFlash, if it
is built with Enable/Disable Interactive Upgrade YafuFlash option selected in Project
Configuration file (*.PRJ) using MDS.
3.15.3.1 Examples
Eg1: Yafuflash -kcs –info rom.ima
Description: Displays the details of both Existing Firmware and new firmware.
Eg2: Yafuflash -kcs rom.ima
Description: This command starts to flash the new rom.ima to the firmware.
Eg3: Yafuflash -kcs –force-boot rom.ima