ADLINK IMB-S90 - Manual (Page 126)

IMB-S90 IPMI User’s Manual
126
start to flash the new rom.ima to the firmware with preserving SEL and IPMI as well as
selected configurations.
Eg11: ./Yafuflash -cd rom.ima -preserve-sel -ignore-existing-overrides
Description: This command works with USB medium, which start to flash the new
rom.ima to the firmware with preserving FRU configurations only
Eg12: ./Yafuflash –cd rom.ima -quite
Description: This command works with USB medium, which start to flash the new
rom.ima with minimum progress details.
3.15.1.3 Examples for KCS Medium:
Eg1: ./Yafuflash –kcs rom.ima -info
Description: This command works with KCS medium which displays the details of both
Existing Firmware and new firmware.
Eg2: ./Yafuflash –kcs rom.ima
Description: This command works with KCS medium which start to flash the new rom.ima
to the firmware.
Eg3: ./Yafuflash –kcs rom.ima –force-boot
Description: This command works with KCS medium which start to flash the new rom.ima
to the firmware with FORCE BootLoader Upgrade.
Eg4: ./Yafuflash –kcs rom.ima –preserve-config
Description: This command works with KCS medium which start to flash the new rom.ima
to the firmware with preserving config params.
Eg5: ./Yafuflash –kcs rom.ima –force-boot –preserve-config
Description: This command works with KCS medium which start to flash the new rom.ima
to the firmware with FORCE BootLoader Upgrade and preserving config params.
Eg6: ./Yafuflash –kcs rom.ima -i
Description: This command works with KCS medium, which start to flash the new
rom.ima using interactive upgrade mode and user, will be prompt to select the Number of
modules and module names to upgrade.
Eg7: ./Yafuflash –kcs -img-section-info
Description: This command works with KCS medium which displays the details of
Existing Firmware.
Eg8: ./Yafuflash –kcs -img-info
Description: This command works with KCS medium which displays the details of
Existing Firmware Version.