ADLINK IMB-S90 - Manual (Page 18)

IMB-S90 IPMI User’s Manual
18
• MAC Address: Read only field showing the IP address of the device.
• V4 Network Mode: The v4 network mode of the device which could be either
disable, static or DHCP.
• IPv4 Address: The IPv4 address of the device (could be static or DHCP).
• V6 Network Mode: The v6 network mode of the device which could be either
disable, static or DHCP.
• IPv6 Address: The IPv6 address of the device.
3.4.3 Remote Control
To redirect the host remotely, click the Launch button. This downloads the jviewer.jnlp file
which after downloaded and launched will open the Java redirection window.
Note: If you wish to Launch JViewer from the Dashboard Page, the KVM option should be
enabled in the Extended Privileges for the logged in user.
3.4.4 Sensor Monitoring
It lists all the available sensors on the device with the following information’s.
• Status: This column displays the state of the device. There are three states.
•
- Denotes normal state
•
- Denotes Warning State
•
- Denotes Critical State
• Sensor: This column states the name of the sensor.
• Reading: This column displays the value of sensor readings.
• If you click the icon, the sensor page for that particular sensor will be displayed.
3.4.5 Event Logs
A graphical representation of all events incurred by various sensors and
occupied/available space in logs can be viewed. If you click on the color-coded rectangle
in the Legend for the chart, you can view a list of those specific events only.
3.5 Field Replaceable Unit (FRU)
The FRU Information Page displays the BMC FRU file information. The information
displayed in this page is Basic Information, Common Header Information, Chassis
Information, Board Information and Product Information of the FRU device.
To open the FRU Information Page, click FRU Information from the menu bar. Select a
FRU Device ID from the Basic Information section to view the details of the selected
device. A screenshot of FRU Information page is given below.