ADLINK IMB-S90 User Manual

Page 129

Advertising
background image

IMB-S90 IPMI User’s Manual

129

3.15.2.1

Examples of Network Medium

Eg1: ./Yafuflash –nw –ip 155.166.132.12 –u admin –p admin rom.ima -info

Description: This command works with network medium using the ip 155.166.132.12,
which displays the details of both Existing Firmware and new firmware.

Eg2: ./Yafuflash –nw –ip 155.166.132.12 –u admin –p admin rom.ima

Description: This command works with network medium using the ip 155.166.132.12,
which start to flash the new rom.ima to the firmware.

Eg3: ./Yafuflash –nw –ip 155.166.132.12 –u admin –p admin rom.ima –force-boot

Description: This command works with network medium using the ip 155.166.132.12,
which start to flash the new rom.ima to the firmware with FORCE BootLoader upgrade.

Eg4: ./Yafuflash –nw –ip 155.166.132.12 –u admin –p admin rom.ima –preserve-config

Description: This command works with network medium using the ip 155.166.132.12,
which start to flash the new rom.ima to the firmware with preserving config params.

Eg5: ./Yafuflash –nw –ip 155.166.132.12 –u admin –p admin rom.ima –force-boot –
preserve-config

Description: This command works with network medium using the ip 155.166.132.12,
which start to flash the new rom.ima to the firmware with FORCE BootLoader upgrade and
preserving config params.

Eg6: ./Yafuflash –nw –host spxbmc –force-boot –preserve-config rom.ima

Description: This command works with network medium using the host name spxbmc,
which start to flash the new rom.ima to the firmware with FORCE BootLoader upgrade and
preserving config params.

Eg7: ./Yafuflash –nw –ip 2000::2005 –force-boot rom.ima

Description: This command works with network medium using the ipv6 address
2000::2005, which start to flash the new rom.ima to the firmware with FORCE BootLoader
Upgrade.

Eg8: ./Yafuflash –nw –ip 155.166.132.12 rom.ima -i

Description: This command works with network medium using the ip 155.166.132.12,
which start to flash the new rom.ima using interactive upgrade mode and user, will be
prompt to select the Number of modules and module names to upgrade.

Eg9: ./Yafuflash –nw –ip 155.166.132.12 –u admin –p admin -img-section-info

Description: This command works with network medium using the ip 155.166.132.12,
which displays the details of Existing Firmware.

Eg10: ./Yafuflash –nw –ip 155.166.132.12 –u admin –p admin -img-info

Advertising
This manual is related to the following products: