ADLINK IMB-S90 - Manual (Page 78)

IMB-S90 IPMI User’s Manual
78
2. Block All blocks all the incoming IP’s and Port’s. Check this option to enable this
feature.
3. Flush All is to flush all the system firewall rules. Check this option to enable this
feature.
4. Click Save to save the changes made else click Cancel to go back to the previous
screen.
3.7.21.1.1 To set system firewall for a range of IP addresses,
Click the IP Address tab. A sample screenshot of IP address tab is shown below.
System Firewall - IP Address
The fields of System Firewall - IP Address tab are explained below.
IP/IP Address Range : Lists all the IP Address or Range of IP Addresses that are already
configured.
IP Settings: To indicate the corresponding IP Address or range of IP Addresses rules that
Allow or Block.
Add: To add a new entry to the firewall entry either IP or Sections
Delete: To delete the selected slot.
3.7.21.1.2 Procedure
To block or allow an IP address or range of IP addresses,
1. Click Add button to add a new rage of IP address.