ADLINK IMB-S90 - Manual (Page 108)

IMB-S90 IPMI User’s Manual
108
hostname.conf: This file is used to configure the host name creation method
Manual/Automatic for the BMC.
Vlaninterfaces: This file helps to enable the vlan interface for the particular LAN interface
vlansetting.conf: This file is to store the vlan ID and Vlan priority for the particular VLAN
interface entry.
bond.conf: This file is to enable the bond interface for the specified LAN interfaces.
Interfaces: This file is to configure the IP/IPV6 addresses for the LAN interface using
static/DHCP method.
activeslave.conf: This file is to configure the active interface for the specified bond
interface. This file depends on bond.conf.
hosts: This file is used to store the host name to map the IP address.
hosts.allow: This file contains the list of hosts that has permission to access the system
hosts.deny: This file contains the list of host that does not allow accessing the system
resolv.conf: This file is used to store the nameserver and domain name for hostname
registration.
dhcp6c-script: This file is used to configure the domain name, DNS server IPv6 address
and NTP address.
dhcp6c.conf: This file is to configure the IPv6 parameters for the DHCPv6 clients.
ncsicfg.conf: This file is to configure the NCSI related configurations.
nsupdate.conf: This file is to configure the channel ID, package ID for the NCSI interface.
phycfg.conf: This file is to configure the link speed, duplex and MTU value for the
specified interface.
dhcp.preip_4: This file is to store the pre IPv4 address. This file will be created at runtime.
3.10.1.1.6 NTP
Following files will be preserved.
ntp.stat: This file contains the auto or manual network type protocols
adjtime: This file contains the time to synchronize the system clock
Localtime: This file is the system link to the file local time or to the correct time zone in the
system timezone directly.
Dependency Configurations: IPMI