ADLINK IMB-S90 - Manual (Page 134)

IMB-S90 IPMI User’s Manual
134
Description: This command works with KCS medium, which start to flash the new
rom.ima using interactive upgrade mode and user, will be prompt to select the Number of
modules and module names to upgrade.
Eg7: ./Yafuflash –kcs -img-section-info
Description: This command works with KCS medium which displays the details of Existing
Firmware.
Eg8: ./Yafuflash –kcs -img-info
Description: This command works with KCS medium which displays the details of Existing
Firmware Version.
Eg9: ./Yafuflash –kcs public.pem –replace-publickey
Description: This command works with KCS medium which replaces the public key in
Existing Firmare.
Eg10: ./Yafuflash -kcs rom.ima -preserve-sel -preserve-ipmi
Description: This command works with KCS medium, which will ask for other
configurations which are already set to be preserved to preserve or not and after that it will
start to flash the new rom.ima to the firmware with preserving SEL and IPMI as well as
selected configurations.
Eg11: ./Yafuflash -kcs rom.ima -preserve-sel -ignore-existing-overrides
Description: This command works with KCS medium, which start to flash the new rom.ima
to the firmware with preserving FRU configurations only
Eg12: ./Yafuflash –nw –ip 155.166.132.12 –u admin –p admin public.pem –replace-
publickey
Description: This command works with network medium using the ip 155.166.132.12,
which replaces the public key in Existing Firmware.
Eg13: ./Yafuflash -nw -ip 155.166.132.12 rom.ima -preserve-sdr
Description: This command works with network medium using the ip 155.166.132.12,
which will ask for other configurations which are already set to be preserved to preserve or
not and after that it will start to flash the new rom.ima to the firmware with preserving SDR
as well as selected configurations.
Eg14: ./Yafuflash -nw -ip 155.166.132.12 rom.ima -preserve-snmp -preserve-ntp
Description: This command works with network medium using the ip 155.166.132.12,
which will ask for other configurations which are already set to be preserved to preserve or
not and
after that it will start to flash the new rom.ima to the firmware with preserving SNMP and
NTP as well as selected configurations.
Eg15: ./Yafuflash -nw -ip 155.166.132.12 rom.ima -preserve-fru -ignore-existing-overrides