ADLINK IMB-S90 - Manual (Page 128)

IMB-S90 IPMI User’s Manual
128
- i Option to interactive upgrade (Upgrade
only required modules)**
-ignore-module-location Option use to skip the user interaction if
the flashing image is Contains different
module locations.
-ignore-boot-version Option use to skip the user interaction if
the Boot loader version is different and –
force boot option is not given.
-img-section-info Displays information about current FW
Sections.
-img-info Displays information about current FW
Versions.
-replace-publickey Option to replace the Public Key in Existing
Firmware.
[MEDIUM]
-cd Option to use USB Medium
-nw,-ip,-u,-p,-host Option to use Network Medium
‘-ip’ Option to enter IP, when using Network
Medium
‘-host’ Option to enter host name, When
using Network Medium
‘-u’ Option to enter UserName, When using
Network Medium
‘-p’ Option to enter Password, When using
Network Medium
-kcs Option to use KCS medium
[FW_IMAGE_FILE]
Firmware image file name [rom.ima].
Note: -preserve-config’, ‘-force-boot’ or ‘-preserve-boot’ option not be used in
interactive upgrade
*IPv6 Support is added after the tool version 2.7. IPv6 Support can be used with latest
Yafu tool and firmware, older version of yafu (and/or) firmware will not work.
**Interactive upgrade is not a default option. This option can be enabled in YafuFlash, if it
is built with Enable/Disable Interactive Upgrade YafuFlash option selected in Project
Configuration file (*.PRJ) using MDS.