Xtramus APMPT-4 V2.4 - Manual (Page 109)

109
E-mail: [email protected]
Website: www. Xtramus.com
XTRAMUS TECHNOLOGIES ®
5.7. Test Tasks – General
Tasks available here include Toggle MDI-II/X, Media Pre-Setting, 1 to Many-UC, 1 to Many-MCV,
Inserting Waiting Time, CALL-EXT and LineEmulate.
5.7.1. Toggle MDI-II/X
Test the Auto MDIX function of different speed/link modes of the DUT. Toggle MDI-II/X is a technology
that automatically detects the required cable connection type (straight-through or crossover) and
configures the connection appropriately.
Setup
 Media Type Select: Click the scroll-down menu to select the media type.

Minimum Waiting Time: APMPT-4 will halt at least for the Minimum Waiting Time you input here
during auto-negotiation process.
 Media Type Waiting Timeout: If the time spent for auto-negotiation exceeds the Media Type
Waiting Timeout you set here, the test will stop and the test result will be fail.
 Reduce Tx Power on 10M Mode: If this function is enabled, the transmitting speed will be set on
10M. Please note that XM-RM600 series module cards do not support this function.
 Port Select: By clicking this button, a Select Ports for Testing window will pop up, allowing you to
select the module cards and the ports you would like to use for the task.