Xtramus APMPT-4 V2.4 - Manual (Page 88)

88
E-mail: [email protected]
Website: www. Xtramus.com
XTRAMUS TECHNOLOGIES ®
occurs. This function must be enabled under full-duplex.

Enable DI Checksum: Enable this function to add a tag to the frame for tracking frame integrity.

Enable Capture: System will capture packets from the port you chose if this function is enabled.

Dynamic Random Seed: Selecting this function will allow generation of different length of
packets from each port.

Port Select: By clicking this button, a Select Ports for Testing window will pop up, allowing you
to select the module cards and the ports you would like to use for the task.