Xtramus APMPT-4 V2.4 - Manual (Page 135)

135
E-mail: [email protected]
Website: www. Xtramus.com
XTRAMUS TECHNOLOGIES ®
6. Test Result & Report
When the test is complete, a Final Report window will pop up and tell you the overview test result as show
in the figure down below.
A final report of Pass will be displayed on the Final Report window if all tasks passed. If any one of the
task fails, a Fail message will be displayed instead.
Press OK button on the Final Report window to finish the test so you can start another test or start
reviewing test results in detail.