Xtramus APMPT-4 V2.4 - Manual (Page 62)

62
E-mail: [email protected]
Website: www. Xtramus.com
XTRAMUS TECHNOLOGIES ®
 On UDP: This function is only available for layer 3 performance task. And before enable this function,
you must assign IP addresses to the ports. This function is used to activate the UDP mode in layer 3.

Dynamic Random Seed: If this function is enabled, the first packet transmitted by every port will be
random, different from each other. Otherwise, the first packet transmitted by every port will be the
same. And this function is only available when the Frame Length is set to random.
 Soft Random Length: This function is only available for XM-RM-881 or XM-RM-891 modules and
only can be performed on 10G layer 2 tasks, like PT2-UC-10G. By activating this function, the packet
length is limited to fluctuate in a small range when it is set to random mode.