Xtramus APMPT-4 V2.4 - Manual (Page 141)

141
E-mail: [email protected]
Website: www. Xtramus.com
XTRAMUS TECHNOLOGIES ®
PoE-Counters
 Iclass (mA): Classes of power level for PoE connection as listed in the table down below.
Class Usage Maximum Power Levels at Input of Powered Device (Watt)
0 Default 0.44 to 12.95
1 Optional 0.44 to 3.84
2 Optional 3.84 to 6.49
3 Optional 6.49 to 12.95
4 Reserved (PSEs classify as Class 0)
Table down below is a brief description for all the counters and their meanings:
Tpdc (ms) Ilim (mA) Peak V (V) Line Consume Power
Values in milliseconds to
classify power level of
the PD (Powered
Device) for PoE connect Values of output mA
current in short circuit
condition For PoE
ShortCircuit.
The peak voltage value.
The power that
consumed by network
cable
Tmpdo (ms) Tlim (ms) Peak I (mA) Watt (W)
Values in milliseconds to
turn off power For PoE
Disconnect
Time limit in
milliseconds in short
circuit condition for PoE
ShortCircuit.
The peak current value. Power consumption.
Icut (mA) Current Vrms Temperature (℃) Eq. PD Power (W)
Value of overload
current for PoE
Overload
Root mean square
voltage. A method to
calculate average
voltage in positive value.
The temperature of the
DUT The equivalent power of
power device (PD).
Tovld (ms) Current Irms Power Eq. Line Power (W)
Value of the overload
time limit in milliseconds
for PoE Overload
Root mean square
electrical current. A
method to calculate
average current in
positive value.
DUT On/Off
The equivalent line
power.
PSE Type
The type of PSE
protocol supported