Xtramus APMPT-4 V2.4 - Manual (Page 29)

29
E-mail: [email protected]
Website: www. Xtramus.com
XTRAMUS TECHNOLOGIES ®
3.3.4. Security
APMPT-4 can run under Admin Mode and Operator Mode:

Admin Mode: Users have the maximum authorization and can access all APMPT-
4‟s functions.

Operator Mode: Users are only allowed to access APMPT-
4‟s basic functions such as loading
saved DUT model test settings and view latest test log/module card information/NuServer
Security
Logout Logout from Admin Mode and switch APMPT-4 to Operator Mode.
Login/Change
Account
Login to the Admin Mode.
Change
Password
You can change the password for Admin Mode here.
For security reasons, it is recommended to change
APMPT-
4‟s password after you first login.

Old Password: Enter the old password here.
 New: Enter the new password here. The new
password should be 6~12 characters and
mustn‟t contain special symbols.
 Confirm: Please type your new password again
for confirming.
 OK: Apply all the changes you‟ve made and
apply.
 Cancel: Cancel and abandon all the changes
you‟ve made.
Reset
Password
If you forget APMPT- 4‟s Admin Mode password, you can reset the password to the
default password “xtramustech”.
Click Yes to start resetting the login password (or No to cancel), and click OK to
complete.
Always login
in OP Mode
Every time when APMPT-4 starts running, it will run under Operator Mode.