Xtramus APMPT-4 V2.4 - Manual (Page 121)

121
E-mail: [email protected]
Website: www. Xtramus.com
XTRAMUS TECHNOLOGIES ®
5.7.5. 1 to Many-MCV
1 to Many-MCV performs Layer 2 VLAN address multicast performance tests from one source port to
multiple destination ports with different media types (such as 100Mbps and 1Gbps Full).
Port Map
Before making any other configurations for 1 to Many-MCV test, you have to assign a Root Port and its
Member Ports for Root 1 first. Please note that only Active Ports from module cards XM-RM731 and
XM-RM891 can serve as Root Ports.
To assign an Active Port as the Root Port for
Root 1, please click the Active Port you would
like to use as a Root Port, and then click the 
button to add it to the Root Port field located on
the right side. To remove the Root Port you‟ve
assigned, click the  button.