Adept s350 Cobra - Manual (Page 38)

Chapter 4: MotionBlox-40R
Figure 4-4. Controls and Indicators on MB-40R
Table 4-2. Status LED Definition
LED Status Description
Off 24 VDC not present
Green, Slow Blink High Power Disabled
Green, Fast Blink High Power Enabled
Green/Red Blink Selected Configuration Node
Red, Fast Blink Fault, see Status Panel Display
Solid Green or Red Initialization or Robot Fault
Status Panel
The status panel, shown in Figure 4-4, displays alpha-numeric codes that indicate the
operating status of the MB-40R/eMB-40R. The following table gives definitions of the fault
codes. These codes provide details for quickly isolating problems during troubleshooting.
Adept Cobra s350 User's Guide, Rev. D
Page 38 of 94