Adept s350 Cobra - Manual (Page 50)

Chapter 4: MotionBlox-40R
4.7 Mounting the MB-40R/eMB-40R
The MB-40R/eMB-40R can be panel-mounted.
NOTE: The mounting of the MB-40R/eMB-40R and all terminations at the MB-
40R/eMB-40R must be performed in accordance with all local and national
standards.
Panel-Mounting the MB-40R/eMB-40R
To panel-mount the MB-40R/eMB-40R, install two brackets on each side at the rear of the unit
(see the following figure for the bracket dimensions). Use the screws from the accessories kit.
Figure 4-10. Panel-Mounting the MB-40R/eMB-40R
Adept Cobra s350 User's Guide, Rev. D
Page 50 of 94