Comtech EF Data SDM-100A - Manual (Page 108)

Operation SDM-100A Satellite Modem
3–74 Rev. 0
SDM-100 "TYPE"
VER: 14.7.4
FUNCTION SELECT
UTILITY
UTILITY
SYSTEM
TIME: HH:MM:SS AM/PM
DATE: MM/DD/YY
REMOTE BAUD RATE
REMOTE ADDRESS
X
LAMP TEST??
Current time and date.
110 4800
150 9600
300 19200
600 EVEN
1200 ODD
2400 NONE
X = 1 to 255 Press [ENTER]
M&C MODULE FW
(Status Only)
FW/NNNNNN-DDR
MM/DD/YY
FPGA FIRMWARE
(Status Only)
FW/NNNNNN-DDR
FPGA FIRMWARE
MM/DD/YY
DSP FIRMWARE
(Status Only)
FW/NNNNN-DDR
DSP FIRMWARE
MM/DD/YY
MASTER RESET
ACCESS TO
SUBMENU
CONDITIONAL OR
OPTION-DEPENDENT Parameter Information
Key:
DISPLAY CONTRAST
LEVEL: X
X = 0 to 100
HARD/SOFT
Initiating a hard reset
the modem and places the
default configuration settings
in the memory. Initiating
soft reset will reset the
modem hardware, but saves
the current firmware
configuration settings.
Figure 3-25. Utility System (Type 1 Operation)