Comtech EF Data SDM-100A - Manual (Page 59)

SDM-100A Satellite Modem Operation
Rev. 0 3–25
3.2.1.2 Monitor
When the “MONITOR” level is entered, press [
←
] or [
→
] to select the desired monitor
function. Each monitor function is displayed in real time as long as it is selected.
Raw BER Raw Bit Error Rate Range: <m.m E -e to >m.m E -e (See Note below)
Corrected BER Corrected Bit Error Rate Range: <m.m E -e to >m.m E -e (See Note below)
E
b
/N
0
Energy bit/Noise Ratio Range: <mm.m to >mm.m (See Note below)
Receive Signal Receive Signal Level Range: <-mm.m to >-mm.m
Sweep Frequency Sweep Monitor Range -35,000 Hz to +35,000 Hz
Buffer Fill Current Buffer Fill Status 1 to 99%
Note: When the decoder loses lock, no data is available, and is so indicated.
If data is under range, “<” (less than) will be indicated. If data is over range, “>”
(greater than) will be indicated.