Comtech EF Data SDM-100A - Manual (Page 86)

Operation SDM-100A Satellite Modem
3–52 Rev. 0
SDM-100 "TYPE"
VER: 14.7.4
FUNCTION SELECT
UTILITY
ACCESS TO
SUBMENU
CONDITIONAL OR
OPTION-DEPENDENT
Parameter Information
Key:
UTILITY FACTORY
SETUP
Factory setup should not be
changed by unauthorized
persons. Failure to comply
may cause modem failure.
Figure 3-16. Utility Factory Setup (SDM-100 and Type 1 Operation)
3.2.1.6.6 Utility Factory Set-Up
This configuration is used for factory alignment and filter setup parameters. To avoid
modem failure, Factory Setup should not be changed by unauthorized persons.