Comtech EF Data SDM-100A - Manual (Page 27)

Rev. 0 2–1
Chapter 2.
INSTALLATION
This chapter provides unpacking instructions, system requirements, and external
connections for the modem.
2.1 Unpacking
The modem and manual are packaged in pre-formed, reusable cardboard cartons that
contain foam spacing for maximum shipping protection. The circuit cards are contained
in the modem chassis.
To remove the modem:
CAUTION
Do not use any cutting tool that will extend more than 1” into the container
and cause damage to the modem.
1. Cut the tape at the top of the carton where it is indicated “OPEN THIS END.”
2. Lift out the cardboard/foam spacer covering the modem.
3. Remove the modem, manual, and power cord from carton.
4. Save the packing material for reshipment back to the factory or to another site.
5. Inspect the equipment for damage incurred during shipment.