Daktronics All Sport 5000 Series Operation Manual - Manual (Page 101)

Football Operations 83
Display Action
MM:SS = minutes, seconds
Press <SET PLAY CLOCK > a third time to display the
configured time for Reset 2 length.
To accept the play clock Reset 2 length, press <YES>.
To decline the selection of the play clock Reset 2 length,
press <NO>.
To change the play clock Reset 2 length and set the play
clock, enter the new time in minutes and seconds on the
number pad and press <ENTER>.
Press <CLEAR> twice to clear changes and return to the
game.
Recall Last Down
The <RECALL LAST DOWN> key is used to re-display the Ball On, Down, To Go, and
Possession values of the previous play if a new value has been incorrectly entered. If Auto
Calculate is off, this function is disabled (see Section 8.4).
Display Action
Press <RECALL LAST DOWN> to redisplay the Ball On,
Down, To Go, and Possession values of the previous play.
Press <YES> to use the previous values.
Press <NO> to use the values that were just entered.
Quarter +1
Display Action
N = current setting
Press <QUARTER +1> to increment the quarter number.
The full time outs are automatically reset at halftime.
Note: When the quarter number increments to 2 or 4 and
Auto Calculate is enabled, the play direction is changed.
The [| or |] symbol shows the current play direction.
PLAY CLOCK-EDI T
RESET 2 MM:SS *
LAST DOWN
RECALL Y/N
QUARTER-+1
N