Daktronics All Sport 5000 Series Operation Manual - Manual (Page 274)

256 Water Polo Operations
Penalty Time
Default times can be set for the penalty keys.
Display Action
MM:SS = minutes, seconds
Enter the correct default time for a penalty in minutes and
seconds on the number pad and press the <ENTER> key.
For example, 0:20.
The penalty time is used as the default when pressing the
player penalty start function.
Time Outs
Note 1: If a full or partial time out is not needed for the HOME or GUEST <TIME OUT>
keys, enter zero for the number of time outs.
Note 2: If a full or partial time out is not needed for <TIME OUT ON/OFF>, enter zero
for the time.
Note 3: The number for each type of time out must be manually entered for an overtime
period using the <EDIT> <TIME OUT> key sequence for each team.
Display Action
N = current setting
Enter the number of full time outs on the number pad and
press <ENTER>.
MM:SS = minutes, seconds
Enter the amount of time for a full time out in minutes and
seconds on the number pad and press <ENTER>.
For example, 1:00
Press <YES> to display the time out time on the LCD and the
main clock digits of the scoreboard while the time out clock is
active.
Press <NO> to display the time out time on the LCD only.
PENALTY TI ME
SET MM:SS*
TI ME OUTS- MODE
FULL N *
TI ME OUTS- TI ME
FULL MM:SS*
TI ME OUTS-MODE
SHOW ON MAI N? N