Daktronics All Sport 5000 Series Operation Manual - Manual (Page 44)

26 Segment Timer Operations
Display Action
Note 1: Regardless of this setting, the value saved in
interval time will be counted down between segments.
Set the interval time to zero if no interval between
segments is desired.
Note 2: When the interval time is being displayed, the
segment number on the scoreboard flashes to indicate
that the time displayed is interval time.
Copy Range
This key sets a range of segments to a specific value.
Display Action
MM:SS = minutes, seconds
XX = starting segment value
YY = ending segment value
Press <COPY RANGE > and enter the time desired. Press
<ENTER> to move to the next field. Enter the first and last
segments that will have this time. When the last segment in
the copy range is set, the menu will be exited.
Once completed, all segments from XX to YY (inclusive) will
be set to the specified value.
Auto Stop
This key is the auto stop function of the console.
Note: To set the console to stop after the last segment in the series is completed, the auto
stop at each segment setting must be set to NO.
Display Action
Press <AUTO STOP> to enter this menu. Press <YES> to set
the console to stop after each segment is completed. Press
<START> to proceed with the next segment.
Press <NO> to set the console to automatically begin the next
segment when each segment is completed. The console will
prompt for the auto stop at last segment setting.
Press <YES> to set the console to stop when the last
segment has been completed. Press <NO> to set the console
to start over at the first segment when the last segment is
completed
COPY: MM:SS *
SEG XX TO YY
AUTO STOP AT
EACH SEG Y/N*
AUTO STOP AT
LAST SEG *Y/N