Daktronics All Sport 5000 Series Operation Manual - Manual (Page 192)

174 Wrestling Operations
Period +1
Display Action
N = current setting
Press <PERIOD +1> to increment the quarter number.
A prompt showing period number displays briefly.
The period time will be set to the configured period time if the
current time is at zero. There are 5 configured period times
and the time will be set based on the current period number.
If the current time was set before the <PERIOD +1> key is
pressed, the time will not be adjusted.
Set Main Clock (Period Times)
Display Action
MM:SS = minutes, seconds
After the main clock has been stopped, press <SET MAIN
CLOCK> to display the current time of the main clock.
To change the time, enter the desired time on the number pad
and press <ENTER>.
Press <CLEAR> twice to clear changes and return to the
game.
MM:SS = minutes, seconds
Press <SET MAIN CLOCK> a second, third, fourth, fifth or
sixth time or the down arrow key to display the configured time
for each clock period length.
To accept the displayed period length press <YES>.
To decline the selection of the period length press <NO>.
To change the period length and set the main clock enter the
new time in minutes and seconds on the number pad and
press <ENTER>.
Press <CLEAR> twice to clear changes and return to the
game.
PERI OD- +1
N
MAI N CLOCK -SET
CURR MM:SS*
MAI N CLOCK -EDI T
PERI OD MM:SS*
MAI N CLOCK -EDI T
PER 2 MM:SS*
MAI N CLOCK -EDI T
PER 3 MM:SS*
MAI N CLOCK -EDI T
PER 4 MM:SS*
MAI N CLOCK -EDI T
PER 5 MM:SS*