Daktronics All Sport 5000 Series Operation Manual - Manual (Page 43)

Segment Timer Operations 25
First Segment
This key sets the first segment in a range of segments to run when <START> is pressed.
Display Action
NN = current setting
Press <FIRST SEGMENT > and enter the segment to be set
as the first segment. Press <ENTER> to accept the time and
exit the function.
The console will be reset to the segment selected here when
the <RESET TO FIRST SEG> key is pressed.
Last Segment
This key sets the last segment in a range of segments to run when <START> is pressed.
Display Action
NN = current setting
Press <LAST SEGMENT > and enter the segment to be set
as the last segment. Press <ENTER> to accept the time and
exit the function.
After the segment set as the last segment is completed,
the console will automatically reset to the segment saved as
the first segment.
Interval Time
The interval time is the time between each segment. The interval time can be displayed on the
Guest digits using the <DISPLAY INTERVAL> key.
Display Action
MM:SS = minutes, seconds
Press <INTERVAL TIME > to display the current value of
interval time on the bottom line of the LCD. Edit the value of
the interval time and press <ENTER>.
Display Interval
This setting determines whether the interval count will be displayed on the scoreboard.
Display Action
Press <DISPLAY INTERVAL>.
Press <YES> to display the interval time on the scoreboard.
Press <NO> to disable interval time display. The interval time
will be displayed only on the console if NO is selected.
FI RST SEGMENT
NN*
LAST SEGMENT
NN*
I NTERVAL TI ME:
MM:SS
DI SPLAY I NTERVAL
YES OR *NO?