Daktronics All Sport 5000 Series Operation Manual - Manual (Page 49)

Baseball Operations 31
Ball Count, Strike Count, Clear Count
The <BALL COUNT +1> and <STRIKE COUNT +1> keys increment the Ball and Strike
digits. Pressing the <CLEAR COUNT> key sets the both counts to zero.
When the Auto Pitch Increment setting is on, the <BALL COUNT +1> and
<STRIKE COUNT +1> keys automatically increment the ball and strike pitch count data of
the team that is not at bat (AT BAT indicator off).
If the Ball Count value is 4 when <BALL COUNT +1> is pressed the value is blanked out.
Press <BALL COUNT +1> a second time to set the value to zero.
If the Strike Count value is 3 when <STRIKE COUNT +1> is pressed the value is blanked
out. Press <STRIKE COUNT +1> a second time to set the value to zero.
Ball and strike pitch count data is not incremented when the <BALL COUNT +1> and
<STRIKE COUNT +1> values are incremented to blank or zero.
Hit, Error, Fielder’s Choice, Clear Hit/Error
The <HIT> and <ERROR > keys are used to turn on the Hit or Error indicator or digits.
The <FIELDER’S CHOICE> key is used to indicate the batter reached due to fielder’s choice
(an “F” will display in the hit/error digit). On some scoreboards, the <ERROR > key can
also display the player’s position when the Error Position setting is on. Pressing the <CLEAR
HIT/ERROR> key turns off the Hit and Error indicators and clears the digits (including
fielder’s choice). <ERROR > is used as an example.
Display Action
Press the <ERROR > key to turn on the Error indicator or
digits.
Press the <ERROR > key again to turn off the Error indicator
or digits.
NN = current setting
When the <ERROR > key is pressed, enter the position
number of the player and press <ENTER>.
This prompt only appears when the Error Position in Edit
Settings is on (see Section 4.4).
Press the <CLEAR HIT/ERROR> key to turn off the Hit and
Error indicators and clear the digits. This also clears the
fielder’s choice.
ERROR: ON
ERROR: OFF
ERROR:
POSI TI ON NN
HI T: OFF
ERROR: OFF