Daktronics All Sport 5000 Series Operation Manual - Manual (Page 288)

270 Rugby Operations
Display Action
MM:SS = minutes, seconds
Enter the correct amount of time per period in minutes and
seconds on the number pad and press <ENTER>.
For example, 20:00 per half or 8:00 per quarter
Note: Pressing <ENTER> to select the period time as the
main clock setting will increment the current period
number if the clock value was previously zero.
MM:SS = minutes, seconds
Set the amount of time between periods.
Enter the correct amount of time for break length in minutes
and seconds on the number pad and press <ENTER>.
For example, 1:00
MM:SS = minutes, seconds
Set the amount of time for the overtime periods.
Enter the correct amount of time for overtime periods in
minutes and seconds on the number pad and press
<ENTER>.
For example, 5:00
Switch Output
The All Sport ® 5000 console has a switch that can be used to run a number of different
devices. The switch can be configured to operate under different settings. The default setting
is 1-CLOCK= 0. To display the desired switch setting:
1. Press the number (0, 1, 2, 3) key as a shortcut or use the left and right arrow keys to
scroll to the desired setting.
2. Press <YES> to select the new setting.
3. Press <NO> or the down arrow key to leave the switch setting and display the next
prompt.
The possible settings for the switch output are as follows:
Setting Result
N = current setting
The switch remains open at all times and any external devices
are disabled.
MAI N CLOCK-TI ME
PERI OD MM:SS*
MAI N CLOCK-TI ME
BREAK MM:SS*
MAI N CLOCK-TI ME
OVERTI ME MM:SS*
SWI TCH OUTPUT=N
0-DI SABLED?