Daktronics All Sport 5000 Series Operation Manual - Manual (Page 132)

114 Hockey/Lacrosse/Handball Operations
Display Action
When the main clock is set to count down and tenths of a
second is selected, the main clock displays in tenths of a
second remaining when the time is below one minute.
Press <YES> to set the main clock to display tenths of a
second.
Press <NO> to display whole seconds.
MM:SS = minutes, seconds
Enter the correct amount of time per period in minutes and
seconds on the number pad and press <ENTER>.
For example, 15:00 per period.
Note: Pressing <ENTER> to select the period time as the
main clock setting will increment the current period
number if the clock value was previously zero.
MM:SS = minutes, seconds
Set the amount of time between periods.
Enter the correct amount of time for break length in minutes
and seconds on the number pad and press <ENTER>.
For example, 10:00.
MM:SS = minutes, seconds
Set the amount of time for the overtime periods.
Enter the correct amount of time for overtime periods
in minutes and seconds on the number pad and press
<ENTER>.
For example, 5:00.
Number of Periods
Display Action
N = current setting
Set the number of periods:

Press the <3> key to select 3 periods.

Press the <4> key to select 4 periods.
Press <ENTER> to set the number of periods.
MAI N CLOCK-MODE
TENTH SECOND? Y
MAI N CLOCK-TI ME
PERI OD MM:SS*
MAI N CLOCK-TI ME
BREAK MM:SS*
MAI N CLOCK-TI ME
OVERTI ME MM:SS*
NO. OF PERI ODS=N
3 OR 4?