Daktronics All Sport 5000 Series Operation Manual - Manual (Page 262)

244 Water Polo Operations
Enable Penalty Clocks
Press <ENABLE PENALTY CLOCKS> to allow the penalty clocks to count when the main
clock is on. The LCD will display “EN” in the lower-right corner.
Disable Penalty Clocks
Press <DISABLE PENALTY CLOCKS> to disable the penalty clocks from counting when the
main clock is on. The LCD will display “DS” in the lower-right corner.
Shot Time
Display Action
MM:SS = minutes, seconds
Press <SHOT TIME > to display the current shot clock time
length.
To accept the current shot clock time length press <YES>.
To decline the selection of the current shot clock time length
press <NO>.
Use the keypad to enter the new time in minutes and seconds
and press <ENTER>.
Press <CLEAR> twice to clear changes and return to the
game.
MM:SS = minutes, seconds
Press <SHOT TIME > a second time to display the
configured time for shot clock Reset 1 length.
To accept the shot clock Reset 1 length press <YES>.
To decline the selection of the shot clock Reset 1 length,
press <NO>.
Use the keypad to enter the new time in minutes and seconds
and press <ENTER>.
Press <CLEAR> twice to clear changes and return to the
game.
Note: The configured time of shot clock is set using the
EDIT SETTINGS function when a new code is selected.
SHOT CLOCK-EDI T
CURR MM:SS*
SHOT CLOCK-EDI T
RESET 1 MM:SS*