Daktronics All Sport 5000 Series Operation Manual - Manual (Page 64)

46 Pitch & Speed Operations
Speed
Display Action
NNN = current setting
The <SPEED > key edits the value of speed that is displayed
on the scoreboard. The value is edited as miles per hour or
kilometers per hour depending on the current display setting.
Show MPH & Show KPH
The <SHOW MPH> key displays the current pitch speed in miles per hour.
The <SHOW KPH> key displays the current pitch speed in kilometers per hour.
Cycle MPH/KPH & Cycle KPH/MPH
These keys set the order that measurements of speed cycle on a fixed digit speed display.
The <CYCLE MPH KPH> key sets the console to display miles per hour 1
st followed by
kilometers per hour when a new pitch speed is received.
The <CYCLE KPH MPH> key displays kilometers per hour followed by miles per hour.
Cycle Time
Display Action
MM:SS = minutes, seconds
Press <CYCLE TIME > to set the length of time each speed
reading is displayed (MPH and KPH) before displaying the
opposite reading.
Note: If the console is set to cycle, a “Y” will be displayed next
to “CYCLE” on the LCD menu. Press <CYCLE MPH KPH> or
<CYCLE KPH MPH> to set console to cycle mode.
Pitch Count Keys (Home & Guest)
Pressing one of the pitch count keys will increment the value by one. To edit one of the
values, use <EDIT> as described below.
Display Action
NNN = current setting
To edit one of the pitch count values (BALL, STRIKE, or
OUT), press <EDIT> and then press the key of the item to be
modified. The current value will be shown on the LCD. Enter
the new value on the number pad and press <ENTER>.
EDI T SPEED
NNN* MPH
CYCLE TI ME
MM:SS*
H.PI TCHER EDI T
BALL: NNN*