Shot clock, Penalty times – Daktronics All Sport 5000 Series Operation Manual User Manual
Page 133

Hockey/Lacrosse/Handball Operations
115
Shot Clock
Display
Action
MM:SS = minutes, seconds
This setting is used for the <RESET> button on the remote
shot clock control console.
Note: The current setting for the <RESET> time displays
on the LCD until the first number key is pressed.
Enter the correct amount of reset time in minutes and seconds
on the number pad and press <ENTER>.
Press <YES> to synchronize the shot clock with the main
clock.
If <STOP> for the main clock is pressed while the main and
shot clocks are running, the shot clock stops. The shot clock
restarts when <START> is pressed for the main clock.
Press <NO> to allow the shot clock to run independently of
the main clock. The shot clock starts and stops only with the
switch on the remote shot clock control console.
Press <YES> to blank the shot clock time when the shot clock
time is greater than or equal to the main clock time. The shot
clock is reset and stopped when the display is blanked to
eliminate inadvertent sounding of shot clock horn.
Press <NO> to display the shot clock time at all times.
Penalty Times
Default times can be set for the minor and major penalty keys. The minor penalty time is used
as the default when first entering the player penalty function.
Display
Action
MM:SS = minutes, seconds
Enter the correct default time for a minor penalty in minutes
and seconds on the number pad and press <ENTER>.
For example, 02:00.
The minor penalty time is used as the default when first
entering the player penalty function.
SHOT CLOCK-TI ME
RESET 1 MM:SS*
SHOT CLOCK-TI ME
RESET 2 MM:SS*
SHOT CLOCK-MODE
SYNC W/ MAI N? Y
SHOT CLOCK-MODE
AUTO BLANK? Y
PENALTY TI ME
MI NOR MM:SS*